Dressing With Diamond Dressing Tools

BASIC GUIDELINES

To achieve a superior surface finish and high metal removal rates, it is of utmost importance to work with SMALL amounts of infeed a_d (0.002 mm to 0.003 mm; 0.00008" to 0,0012").

In order to increase the wheel's surface roughness, increase the crossfeed velosity v_d rather than increasing the depth of dressing infeed a_d.Higher crossfeed velocity = higher wheel surface roughness and vice versa.

Notes:

-Always apply grinding fluid when dressing. Diamonds are very heat sensitive!
- Never traverse grinding wheel without further incrementing the dressing depth.

Terminology:

a_d = Depth of infeed of dressing tool (mm or inch)
b_d = Effective width dressing tool (mm or inch)
n_s = Grinding wheel RPM
s_d = Crossfeed rate of diamond dressing tool per grinding wheel revolution (mm/min or inch/min)
u_d = Overlap ratio (No.)
v_d = Crossfeed velocity of dressing tool (mm/min or inch/min)

These wheels are inventoried at our facility in Switzerland . Standard delivery for wheels listed in inventory is approximately (6) weeks via sea freight or for an additional charge to cover the added cost of transportation (2-3) weeks via air. Also, should you not be able to find the exact dimensions you require for an additional cost to cover alteration, any of the existing wheels may be modified into lesser dimensions or supplied with standard or special shapes.

Members of:

Winterthurusa.net © 2012 All rights reserved. Reproduction in whole or any form or medium without express written
permission of Winterthurusa.net is strictly prohibited and punishable by law.
Site designed and maintained by:Your Page Today Web Design