NaxoForce Truing & Dressing Information SUGGESTED OPERATING PARAMETERS FOR NAXOFORCE WHEELS

TRUING SPEEDS & FEEDS ENGLISH	ENGLISH	METRIC
Soft Fine Grit Silicon Carbide Wheel:	1980 - 3960 sfpm	10 - 20 m/s
CBN / Diamond wheel speed:	594 - 990 sfpm	3 - 5 m/s
Oscillation Feed:	11.8 - 39.4 ft/min	300-1000 mm/min
Infeed / Turning point:	0.0008 - 0.0028 in	0.02 – 0.07 mm
DRESSING STICK (soak in water 5 min)
CBN / Diamond wheel speed:	2970 3960 sfpm	15 - 20 m/s
Rotation of CBN / Diamond wheel same as during grinding and push the Dressing Stick firmly into the Rotating Wheel
CLAMPED DRESSING STICK (soak in water 5 min)
CBN / Diamond wheel speed:	2970 - 3960 sfpm	15 - 20 m/s
Depth:	0 .02 – 0.04 in	0.5 - 1 mm
Feedrate:	11.8 – 19.7 in/min	300 - 500 mm/min
Naxoflute Wheel
Roughing:	3366 - 3564 sfpm	17 - 18 m/s
Finishing:	5940 - 6930 sfpm	30 - 35 m/s
Finishing Depth:	0.0008 - 0.002 in	0.02 – 0.05 mm
NaxoEdge Wheel (Gashing)
Large Gash:	3960 sfpm	20 m/s
Small Gash:	5940 sfpm	30 m/s
Radial Backing Off (Drills )	3960 - 4950 sfpm	20 - 25 m/s
NaxoClear Wheel
Primary Angle:	4950 - 6930 sfpm	25 - 35 m/s
Secondary Angle:	3960 - 5940 sfpm	20 - 30 m/s
NaxoPolish Wheel
Speed:	35 m/s	6930 sfpm
Depth:	0.0008 - 0. 001 in	0.02 – 0.025 mm
Remember: Large Contact Area = Lower Peripheral Speed Small Contact Area = Higher Peripheral Speed