 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Suggested operating parameters for NaxoForce wheels
| TRUING SPEEDS & FEEDS | ENGLISH | METRIC |
| Soft Fine Grit Silicon Carbide Wheel: | 1980-3960 sfpm | 10-20 m/s |
| CBN / Diamond wheel speed: | 594-990 sfpm | 3-5 m/s |
| Oscillation Feed: | 11.8-39.4 ft/min | 300-1000 mm/min |
| Infeed / Turning point: | .002- .008 in | .02–0.07 mm |
| DRESSING STICK (soak in water 5 min) |
||
| CBN / Diamond wheel speed: | 2970 3960 sfpm | 15-20 m/s |
Rotation of CBN / Diamond wheel same as during grinding and push the Dressing Stick firmly into the Rotating Wheel |
||
| CLAMPED DRESSING STICK (soak in water 5 min) |
||
| CBN / Diamond wheel speed: | 2970-3960 sfpm | 15-20 m/s |
| Depth: | 0,02–0,04 in | 0.5-1 mm |
| Feedrate: | 11.8–19.7 in/min | 300-500 mm/min |
| Naxoflute Wheel | ||
| Roughing: | 2954-3564 sfpm | 15-18 m/s |
| Finishing: | 5940-6930 sfpm | 30-35 m/s |
| Finishing depth: | 0,0008-0,00 in | 0,02-0,05 mm |
| NaxoEdge Wheel (Gashing) | ||
| Large Gash: | 3960 sfpm | 20 m/s |
| Small Gash: | 5940 sfpm | 30 m/s |
| Radial Backing Off (Drills) | 3960-4950 sfpm | 20 25 m/s |
| NaxoClear Wheel | ||
| Primary Angle: | 4950-6930 sfpm | 25-35 m/s |
| Secondary Angle: | 3960-5940 sfpm | 20-30 m/s |
| NaxoPolish Wheel | ||
| Speed: | 35 m/s | 6930 sfpm |
| Depth: | .0004-.0008in | 0.01–0.02 mm |
Remember: Large Contact Area = Lower Peripheral Speed
Small Contact Area = Higher Peripheral Speed
Winterthurusa.net © 2007 All rights reserved. Reproduction in whole or any form or medium without express written
permission of Winterthurusa.net is strictly prohibited and punishable by law.
Site designed and maintained by: Your Page Today Web Design
permission of Winterthurusa.net is strictly prohibited and punishable by law.
Site designed and maintained by: Your Page Today Web Design