Dressing With Diamond Dressing Tools

Dressing With Diamond Dressing Tools

DRESSING WITH DIAMOND BLADE TOOLS

Guidelines:

Wheel surface speed:
-dress at full working surface speed

Always use blade tool in such a fashion that the diamond-free section on the back of the blade touches the grinding wheel first. This will ensure a free-cutting dressing operation.

Apply ample amounts of grinding fluid while dressing as diamonds are very heat sensitive. Ensure uninterrupted flow.

In order to increase the wheel's surface roughness, increase the crossfeed velocity v_drather than increasing the depth of dressing infeed a_d.

Depth of cut a_d= 0.005 tp 0.02 mm (0.0002 to 0.0008 inch)

Guidelines for dressing crossfeed velocity v_d:
n_s= grinding wheel RPM.

These wheels are inventoried at our facility in Switzerland . Standard delivery for wheels listed in inventory is approximately (6) weeks via sea freight or for an additional charge to cover the added cost of transportation (2-3) weeks via air. Also, should you not be able to find the exact dimensions you require for an additional cost to cover alteration, any of the existing wheels may be modified into lesser dimensions or supplied with standard or special shapes.

Members of:

Winterthurusa.net © 2008 All rights reserved. Reproduction in whole or any form or medium without express written
permission of Winterthurusa.net is strictly prohibited and punishable by law.
Site designed and maintained by:Your Page Today Web Design